| No.168 Xiaokang Road, Gongyi City |
| Manager Li |
Phone on duty:
| 13523455655 |
| 0371-64311509 |
| 0371-64311092 |
| 0371-64311092 |
| email@example.com |
Construction waste shredder
With the acceleration of urban construction, construction waste is also increasing. People enjoy a large proportion while enjoying urban civilization, and they are also suffering from urban waste. Most of the construction waste, construction waste is transported to the open-air storage or landfill in the suburbs without any treatment. The disposal method consumes a lot of land requisition costs, construction waste and other construction expenses. At the same time, the problems of fugitive and dust, dust and other flying problems during the removal and storage process have caused serious environmental pollution and become a part of urban construction. Great nuisance.
SCF600 × 400
SCF600 × 600
SCF800 × 600
SCF1000 × 800
Construction waste crusher can turn construction waste into treasure. Construction waste must be disposed of before it can be used. The recycling process in the building is to put different crushing equipment. Screening equipment, conveying equipment and equipment for removing impurities are reasonably assembled together in the production process. With this construction waste crusher, the application concept and technical advantages of its miniaturized recycling system can be brought into full play, which lays a solid foundation for the harmlessness, reduction and resource treatment of construction waste. This construction waste shredder can perform centralized recycling, processing and regeneration, and comprehensive utilization of a huge amount of construction waste. While obtaining economic benefits, it also accepts a large amount of waste, which is not only conducive to turning waste into treasure, saving resources, but also beneficial to Protect the ecological environment and reduce the waste of valuable land.
"Gongyi Xiaoyi North China Heavy Machinery Plant" developed and produced a construction waste grinder after a long-term inspection and bold practice. This machine is equivalent to two traditional machines. The two-stage rotor is used in series and has the following characteristics:
First, the two sets of rotors of the construction waste shredder connected in series are finely divided into particles by the upper-stage rotor shredder, and are conveyed to the lower-stage rotor shredder into fine powder, which are crushed to each other to achieve the effect and are directly discharged from the machine.
Second, the construction waste pulverizer has no sieve and sieve bottom, and high-humidity materials will never be blocked. The traditional grinder has a sieve and a sieve bottom. The crushing of materials with high water content is likely to block the machine, resulting in unsuitable unloading of the material and serious consequences of burning the motor. This construction waste crusher is not designed with sieve screen and bottom. There is no requirement for materials with high water content, and it will not cause unnecessary consequences due to blockage.
Third, the construction waste crusher uses a unique gap adjustment technology. After the hammer head is worn, the distance between the hammer head and the liner becomes larger. The gap between the hammer head and the liner can be adjusted to reduce the distance between the hammer head and the liner.
Fourth, the construction waste crusher is equipped with a counterweight balance wheel, which runs smoothly and has a large inertia, which saves electricity and does not require foundation installation. The upper and lower sets of rotor shaft ends are flywheels. The flywheels can adjust the periodic speed fluctuations of the operation to make them operate in a balanced manner, increase the rotational inertia, reduce the movement resistance, and save electricity.
Fifth, the construction waste crusher uses a centralized lubrication system, which can be used to oil the machine at any time without stopping, and it is simple and convenient to operate without multiple oil supply.
Sixth, the construction waste crusher adopts a hydraulically activated casing, which can be easily operated by only one person, which is not only light and fast, but also safe and reliable, and convenient for maintenance.
Technical parameters of construction waste crusher:
| model || SCF600x400 || SCF600x600 || SCF800x600 || SCF1000x800 |
| Maximum feed size || ≤200 mm || ≤300 mm || ≤400 mm || ≤500 mm |
| Output granularity || ≤3mm (about 80% above 2mm || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) |
| Production capacity || 10-20 tons / hour || 20-30 tons / hour || 35-50 tons / hour || 50-70 tons / hour |
| Allowable material moisture content || ＜ 25% || ＜ 25% || ＜ 25% || ＜ 25% |
| Motor Power || 18.5 + 18.5 (15) -4 levels || 22 + 22 kW-4 || 45 + 45 （37） kw-4 || 75 + 55 kW-4 |
| Dimensions || 2560x1020x1650 (mm) || 2760x1280x1750 (mm) || 3760x1314x2140 (mm) || 4500x1700x3150 (mm) |
| If you need help, please call: 0371-64311509, Gongyi Xiaoyi North China Heavy Machinery Factory is always ready to provide you with better products and the most economical and reasonable solution. Our technical experts are ready to provide you with technical assistance and hope to contact you Establish a long-term, high-value partnership! |
| Related Products: Shale Pulverizer , Cinder Pulverizer , Slag Pulverizer , Slag Pulverizer , Pulverizer , Construction Waste Pulverizer , Mobile Pulverizer Keywords on this page: Construction Pulverizer |