| No.168 Xiaokang Road, Gongyi City |
| Manager Li |
Phone on duty:
| 13523455655 |
| 0371-64311509 |
| 0371-64311092 |
| 0371-64311092 |
| firstname.lastname@example.org |
The slag pulverizer replaced the earlier single-stage pulverizer with a sieve bottom, which perfectly solved the problem of difficult crushing of high-humidity materials. At present, the double-stage sieve slag pulverizer of Xiaoyi Huabei Heavy Machinery Plant in Gongyi City, China has a unique design and simple operation The fine workmanship is aimed at individual users and small and medium-sized enterprises. It is the most effective investment, which effectively saves customers the cost of purchasing equipment. The equipment has high output, low noise and low fineness. The whole equipment is easy to maintain and can be started without special installation.
SCF600 × 400
SCF600 × 600
SCF800 × 600
SCF1000 × 800
Slag crusher , also known as ore crusher, is only our patented product. At present, vermiculite and coal slag have become popular as additive materials and internal fuel for brick factories; the production of standard bricks and hollow bricks with vermiculite and shale has become a major measure in line with national policies and benefiting society. However, the problem of pulverizing these materials, especially the problem of the material pulverizer, has never been solved, which has brought a lot of trouble to the brick factory.
Under the leadership of experts, our company is not afraid of hardships, not afraid of difficulties, and fights hardships and hardships. Finally, a new patented product capable of easily crushing high-humidity materials was successfully developed. This product solves the problem of high-humidity material crusher and is well received by customers!
The workload of one machine is equivalent to the workload of two old grinders. It uses two sets of rotors in series and has the following characteristics:
1. The two sets of rotors connected in series are first crushed by the hammer of the upper rotor to crush the materials into fine particles. The materials conveyed to the lower rotor are crushed to each other, the hammer crushes the materials, and the materials are crushed to each other. To achieve the effect of efficient crushing materials, the materials are directly discharged.
2. No sieve bottom is designed, and high-humidity materials will never be blocked. The traditional crusher has a sieve and a sieve bottom. It cannot crush high-humidity materials. Crushing high-humidity materials is prone to blockages. Motors burn out due to blockages and affect production. The machine is not designed with a sieve screen, and there is no requirement for materials with high water content. Even the materials just removed from the water can be crushed. There is no problem of blocking the sieve plate, and there is no fine powder. The problem of timely discharge and repeated crushing, so the crushing efficiency is high, and there is no phenomenon of abrasion of the hammer for no reason.
3. Unique two-way gap adjustment technology, the gap between the hammer head and the liner becomes larger and thicker after the wear of the hammer head, the distance between the hammer head and the liner board can be adjusted, and it can be continuously used to control the fineness of the crushed material.
4.Centralized lubrication system, without stopping oiling, the whole machine can synchronize all bearings with lubricating oil at any time in the working state of the machine, which is convenient and fast to prevent dust from damaging the bearings.
5.Hydraulic opening and closing device, only one person can operate the whole process, which is not only light and fast, but also safe and reliable, and easy to maintain.
Technical parameters of slag crusher:
| model || SCF600x400 || SCF600x600 || SCF800x600 || SCF1000x800 |
| Maximum feed size || ≤200 mm || ≤300 mm || ≤400 mm || ≤500 mm |
| Output granularity || ≤3mm (about 80% above 2mm || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) |
| Production capacity || 10-20 tons / hour || 20-30 tons / hour || 35-50 tons / hour || 50-70 tons / hour |
| Allowable material moisture content || ＜ 25% || ＜ 25% || ＜ 25% || ＜ 25% |
| Motor Power || 18.5 + 18.5 (15) -4 levels || 22 + 22 kW-4 || 45 + 45 （37） kw-4 || 75 + 55 kW-4 |
| Dimensions || 2560x1020x1650 (mm) || 2760x1280x1750 (mm) || 3760x1314x2140 (mm) || 4500x1700x3150 (mm) |
| If you need help, please call: 0371-64311509, Gongyi Xiaoyi North China Heavy Machinery Factory is always ready to provide you with better products and the most economical and reasonable solution. Our technical experts are ready to provide you with technical assistance and hope to contact you Establish a long-term, high-value partnership! |
| Related Products: Coal Gangue Pulverizer , Cinder Pulverizer , Slag Pulverizer , Slag Pulverizer , Pulverizer , Construction Waste Pulverizer , Mobile Pulverizer Keywords: Slag Pulverizer |