| No.168 Xiaokang Road, Gongyi City |
| Manager Li |
Phone on duty:
| 13523455655 |
| 0371-64311509 |
| 0371-64311092 |
| 0371-64311092 |
| email@example.com |
Cinder pulverizer is mainly used for pulverizing slag. Generally, it is mainly used as a brick factory to make bricks for internal combustion or additives. The slag can also be crushed and returned to the furnace for combustion. But the dry cinder is smashed, what should we do if the cinder is wet. Don't worry, the cinder pulverizer solves the headache that the wet material is difficult to pulverize.
SCF600 × 400
SCF600 × 600
SCF800 × 600
SCF1000 × 800
The cinder crusher developed by our company can crush a lot of materials, so its alias is called wet cinder crusher. Why is it such a name? Because it can crush any material, whether it is high humidity material or hard material, it can be crushed. Even materials picked up in fresh water can be crushed, and solid materials like rock can also be crushed. It will not be blocked by high-humidity materials, and it will not wear the hammer ineffectively. It is strong and wear-resistant, and can be used for a long time without wearing the hammer head. Even if there is wear, you can use it repeatedly as long as you adjust the gap between the hammer heads. This product breaks through the smashing of high-humidity materials and the long-term use of wear-resistant hammer heads. The market response was particularly good. Equipped with counterweight balance wheel, it runs smoothly and has large inertia, which can save electricity. The upper and lower sets of rotors have flywheels. The flywheels can adjust the periodic speed fluctuation of the operation to make it run evenly and smoothly. It has added inertia to overcome the resistance to movement and save electricity. Centralized lubricating system, oil filling without stopping, convenient and quick. The whole machine can be filled with lubricating oil at the same time at all times when the machine is in working condition, which is simple and convenient, safe and reliable, and easy to maintain.
Let's talk about the outstanding characteristics of the cinder crusher.
First: The coal slag crusher does not have a screen and a bottom. It can crush any wet or dry material. It can be produced even in rainy days.
Second: The cinder crusher uses an upper and lower two-stage rotor crushing system. After the material is crushed by the upper stage, it enters the lower rotor to be crushed again. The material forms a hammer powder in the crushing cavity, and the effect of the powder is then discharged.
Third: The clinker crusher device has a counterweight balancing device, which can save electricity by more than 20%. The other is to increase the power of the hammer.
Fourth: The cinder crusher adopts two-way gap adjustment technology. After the hammer head is worn, the position of the hammer head is adjusted to ensure the gap between the hammer head and the lining plate, and the output granularity is guaranteed.
Fifth: The cinder crusher adopts hydraulic starting casing technology, and one person can open the casing, and the maintenance and inspection of parts and components are convenient and quick.
Sixth: The coal slag crusher has changed the traditional butter nozzle oiling method, and adopts the centralized oiling method, which can be filled even without stopping.
Please purchase the cinder crusher from Gongyi Heavy Machinery Manufacturing Co., Ltd. We can crush the raw materials on-site for each customer.
Technical parameters of cinder crusher:
| model || SCF600x400 || SCF600x600 || SCF800x600 || SCF1000x800 |
| Maximum feed size || ≤200 mm || ≤300 mm || ≤400 mm || ≤500 mm |
| Output granularity || ≤3mm (about 80% above 2mm || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) |
| Production capacity || 10-20 tons / hour || 20-30 tons / hour || 35-50 tons / hour || 50-70 tons / hour |
| Allowable material moisture content || ＜ 25% || ＜ 25% || ＜ 25% || ＜ 25% |
| Motor Power || 18.5 + 18.5 (15) -4 levels || 22 + 22 kW-4 || 45 + 45 （37） kw-4 || 75 + 55 kW-4 |
| Dimensions || 2560x1020x1650 (mm) || 2760x1280x1750 (mm) || 3760x1314x2140 (mm) || 4500x1700x3150 (mm) |
| If you need help, please call: 0371-64311509, Gongyi Xiaoyi North China Heavy Machinery Factory is always ready to provide you with better products and the most economical and reasonable solution. Our technical experts are ready to provide you with technical assistance and hope to contact you Establish a long-term, high-value partnership! |
| Related Products: Coal Gangue Pulverizer , Shale Pulverizer , Slag Pulverizer , Slag Pulverizer , Pulverizer , Construction Waste Pulverizer , Mobile Pulverizer Keywords: Cinder Pulverizer |