| No.168 Xiaokang Road, Gongyi City |
| Manager Li |
Phone on duty:
| 13523455655 |
| 0371-64311509 |
| 0371-64311092 |
| 0371-64311092 |
| firstname.lastname@example.org |
Slag crusher is a new type of equipment specifically for slag crushing. The emergence of slag crusher solves the problem of difficult crushing of wet slag. The traditional old-fashioned pulverizer can crush the dry slag, but it is a headache to pulverize the wet slag, and the birth of the slag pulverizer not only solves this problem, but also improves the particle size of the material. The slag crusher adopts the upper and lower two-stage crushing principle. The discharge size is uniform and the discharge size is fine. It can be controlled below 3mm, of which 2mm accounts for more than 90%. In addition, the slag crusher is designed without a screen and a bottom. It is truly a wet and dry model. You can work as usual even in rainy days.
SCF600 × 400
SCF600 × 600
SCF800 × 600
SCF1000 × 800
Slag pulverizers can not only crush slag, for example: coal gangue, slag, coal slag, shale, construction waste, etc. can be crushed, in addition, it is also the leader in crushing feed.
The slag pulverizer can not only pulverize the raw materials to a certain degree of fineness, but also pulverize the wet material without sieve bottom and without clogging. The output is high and economical, so as to achieve the result of waste utilization. Slag pulverizer slag can be used to make cement, brick and refractories. Solve the problems of using vermiculite, slag, and shale as bricks to add materials and internal fuel; use vermiculite, slag, and shale to produce standard bricks and hollow bricks to crush high-humidity materials.
The slag crusher has the following characteristics:
One of the superior performances: The slag crusher is designed without a screen and bottom, so there is no requirement for the moisture content of the crushed material. Compared with the traditional old-style slag grinder with screen, once the moisture point exceeds 8%, it is very easy to block up and even burn the motor.
Superior performance two: The slag crusher uses a two-stage rotor crushing system. After the material is pulverized by the upper rotor, it enters the lower rotor to be pulverized. The material forms a hammer powder and a powder effect in the pulverization cavity. The discharge size is uniform, and the minimum can be controlled below 2 millimeters (mm).
Third, superior performance: The slag crusher device has a balance device, so that the machine runs stably and saves more than 20% of electricity. The most important point is that it can increase the swing of the hammer head and increase the output.
Fourth of superior performance: The slag crusher changes the previous grease filling method of the grease nipple to a centralized lubrication system so that oil can be injected without stopping.
Fifth superior performance: The slag crusher uses a hydraulically activated casing, and one person can start the casing for maintenance or inspection of parts. Convenient.
Sixth of superior performance: The original two-way adjustable gap of the slag crusher does not need to be repaired or replaced after the hammer head is worn. Adjust the position of the hammer head and continue to use it. One hammer head can be used with three hammer heads.
Please purchase the slag grinder from Gongyi Xiaoyi North China Heavy Machinery Factory. We can grind the raw materials for each customer on site.
Technical parameters of slag crusher:
| model || SCF600x400 || SCF600x600 || SCF800x600 || SCF1000x800 |
| Maximum feed size || ≤200 mm || ≤300 mm || ≤400 mm || ≤500 mm |
| Output granularity || ≤3mm (about 80% above 2mm || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) |
| Production capacity || 10-20 tons / hour || 20-30 tons / hour || 35-50 tons / hour || 50-70 tons / hour |
| Allowable material moisture content || ＜ 25% || ＜ 25% || ＜ 25% || ＜ 25% |
| Motor Power || 18.5 + 18.5 (15) -4 levels || 22 + 22 kW-4 || 45 + 45 （37） kw-4 || 75 + 55 kW-4 |
| Dimensions || 2560x1020x1650 (mm) || 2760x1280x1750 (mm) || 3760x1314x2140 (mm) || 4500x1700x3150 (mm) |
| If you need help, please call: 0371-64311509, Gongyi Xiaoyi North China Heavy Machinery Factory is always ready to provide you with better products and the most economical and reasonable solution. Our technical experts are ready to provide you with technical assistance and hope to contact you Establish a long-term, high-value partnership! |
| Related Products: Coal Gangue Pulverizer , Shale Pulverizer , Slag Pulverizer , Slag Pulverizer , Pulverizer , Construction Waste Pulverizer , Mobile Pulverizer |