| No.168 Xiaokang Road, Gongyi City |
| Manager Li |
Phone on duty:
| 13523455655 |
| 0371-64311509 |
| 0371-64311092 |
| 0371-64311092 |
| email@example.com |
No screen bottom crusher
No screen bottom crusher is a new type of crushing equipment. The sieveless pulverizer is mainly developed for the problem of difficult crushing of wet materials. Although there is no sieve bottom pulverizer, the particle size of the pulverized material without sieve bottom pulverizer is relatively uniform, which can be controlled to 3mm (of which 90% is 2mm)
SCF600 × 400
SCF600 × 600
SCF800 × 600
SCF1000 × 800
With the establishment and improvement of the socialist market economic system, the problems of reform and development of small and medium-sized enterprises have attracted increasing attention. Under the circumstances of changes in the economic environment, the development of Xiaoyi North China Heavy Machinery Plant in Gongyi City also faces this new Contradictions, the most critical of which is the lack of technological innovation capabilities, which are mainly manifested in lack of information, talent, funding, scientific management knowledge, and sincere and thoughtful service. Therefore, the establishment of a sound, socially appropriate technology-based enterprise is our important content now.
Now our company is keeping a close eye on technological innovation, employing high-level professional and technical personnel, adopting a variety of new technologies, new processes and new methods, and improving traditional processes. For example, a pulverizer, the traditional pulverizer has a sieve at the bottom. When it encounters rainy days for pulverization, it will make a sound, so it is not easy to use.
After our technological innovation, after many repeated explorations and experiments, the emphasis is on creating a new type of sieveless pulverizer.
Our company focuses on the production of crushing and crushing equipment. The screenless bottom crusher is a suitable coal gangue crushing equipment independently developed and designed by our factory after combining the characteristics of various crushers and actively referring to the feedback of customers. The sieveless pulverizer is equivalent to two hammers combined into one, which is reasonably combined into a whole, and two sets of rotors are used in series.
Low cost, high output, good crushing effect, adjustable internal hammer quantity and position to freely control the discharge fineness are the main features of the screenless bottom grinder.
No screen bottom crusher has the following characteristics:
1. The double rotor of the screenless bottom crusher crushes the two sets of rotors connected in series, so that the material crushed by the hammer of the upper rotor is immediately broken again by the hammer of the lower rotor that rotates rapidly, and the material in the inner cavity is reversed. They collide with each other quickly and smash each other to achieve the effect of hammer powder and powder, and they are directly discharged.
Second, the sieveless pulverizer has no sieve sieve bottom and high-humidity materials. It will never block the traditional pulverizer with sieve sieve plate. It is not suitable for raw materials with a moisture content higher than 8%. At this time, it is very easy to cause serious blockage, so that the hammer head cannot rotate, the material cannot be discharged, and even the motor is burned out, which seriously affects production.
The design of the machine has no sieve screen bottom, no strict requirements on the moisture content of the material, there is no problem of blocking the sieve plate, and there is no problem of fine powder that cannot be discharged in time and repeated crushing, so the crushing efficiency is high, and there is no hammer. Ineffective wear.
Third, the weightless balance wheel of the sieve-less crusher device runs smoothly and has a large inertia, which saves 20% of electricity.
The upper and lower sets of rotor shaft ends are equipped with flywheels. The flywheels can adjust the periodic speed fluctuations of the operation to make the operation uniform and stable, increase the rotational inertia, overcome the resistance to movement, and save more than 20% of power.
Fourth, the unique two-way gap adjusting technology of the screenless bottom grinder, the gap between the hammer head and the liner becomes larger and larger after the wear of the hammer head, and the gap between the hammer head and the liner can be continuously moved by moving the center outward. The gap can also be adjusted by pushing the liner from the outside to the inside to control the discharge granularity.
Fifth, the sieve-less grinder hydraulic manual start of the casing hydraulic opening and closing device, only one person can easily open and close the casing, not only lightweight, fast, safe and reliable, and easy to maintain.
6. The centralized lubrication system of the non-sieve bottom grinder, without stopping the oil injection, convenient and fast two-stage grinder lubrication system, changed the traditional way of filling the grease nipple and oil cup with lubricating oil; equipped with a centralized oil distribution pump, one step operation, and more Road oil supply; the whole machine can be simultaneously filled with lubricating oil at the same time at any time in the working state of the machine, convenient and fast. Because the entire oil circuit is closed, it can prevent dust from invading and damaging the bearing.
Technical parameters of sieving bottom crusher:
| model || SCF600x400 || SCF600x600 || SCF800x600 || SCF1000x800 |
| Maximum feed size || ≤200 mm || ≤300 mm || ≤400 mm || ≤500 mm |
| Output granularity || ≤3mm (about 80% above 2mm || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) |
| Production capacity || 10-20 tons / hour || 20-30 tons / hour || 35-50 tons / hour || 50-70 tons / hour |
| Allowable material moisture content || ＜ 25% || ＜ 25% || ＜ 25% || ＜ 25% |
| Motor Power || 18.5 + 18.5 (15) -4 levels || 22 + 22 kW-4 || 45 + 45 （37） kw-4 || 75 + 55 kW-4 |
| Dimensions || 2560x1020x1650 (mm) || 2760x1280x1750 (mm) || 3760x1314x2140 (mm) || 4500x1700x3150 (mm) |
| If you need help, please call: 0371-64311509, Gongyi Xiaoyi North China Heavy Machinery Factory is always ready to provide you with better products and the most economical and reasonable solution. Our technical experts are ready to provide you with technical assistance and hope to contact you Establish a long-term, high-value partnership! |
| Related Products: Shale Pulverizer , Cinder Pulverizer , Slag Pulverizer , Slag Pulverizer , Pulverizer , Construction Waste Pulverizer , Mobile Pulverizer Keywords on this page: Screenless Pulverizer |