| No.168 Xiaokang Road, Gongyi City |
| Manager Li |
Phone on duty:
| 13523455655 |
| 0371-64311509 |
| 0371-64311092 |
| 0371-64311092 |
| email@example.com |
The double-stage pulverizer is a device that meets the needs of the market. A new and innovative structure model, the double-stage pulverizer , has been developed for the problems of difficult to pulverize high-humidity materials and uneven discharge particle size. This double-stage pulverizer is an improvement on the basis of traditional pulverizing equipment, and adopts two-stage pulverizing equipment for the material. The two-stage pulverizer also has no sieve bottom, so the pulverized material is uniform and no clogging will occur. Let's take a closer look at this two-stage grinder!
SCF600 × 400
SCF600 × 600
SCF800 × 600
SCF1000 × 800
The range of raw materials crushed by the two-stage crusher is very wide. Not only can it crush crushed dry materials, but even crushed materials with 100% moisture content will not cause blockage. At present, brick factories generally use coal gangue, shale, cinder and other materials as additives or internal fuels, but these materials are dry and crushed, and the normal production of brick factories is disturbed if the humidity is high. Because traditional grinders are designed with a sieve bottom and a grate net. When the material is wet or has a large viscosity, it is easy to block the sieve bottom and cause burnout of the motor. After using the equipment of the two-stage pulverizer, various problems were solved. Since there are so many highlights of the two-stage pulverizer, let me introduce you:
1.Double-stage crusher with double rotors for upper and lower poles for crushing
Two sets of rotors connected in series, the material crushed by the upper rotor is rapidly broken by the lower rotor with a hoe, so that the materials in the inner cavity collide with each other rapidly and smash each other, so as to achieve the powder and powder. Material effect, and then unload it directly.
2. There is no sieve bottom, and high-moisture content wet materials will never be blocked.
Traditional grinders are equipped with a sieve sieve plate. This is not suitable for raw materials with a water content of more than 8%. When the water content is more than 10% of the raw material itself, it is extremely easy to cause serious blockage, so that the hammer cannot be rotated. The material cannot be discharged smoothly, and some even burn the motor, which seriously affects the production.
The design of the double-stage crusher has no sieve plate, and there is no strict requirement for the moisture content of the material. There is no problem of blocking the sieve plate with the material, and there is no problem that the fine powder cannot be discharged in time and repeated crushing. High efficiency, no hammer ineffectiveness and wear.
3.Dual-stage crusher wear-resistant combined hammer
The high-alloy wear-resistant hammer head is used in combination with the hammer head and the hammer handle, only the hammer head is changed, and the hammer handle is not changed.
4. The dual-stage crusher has two rotors for two stages of crushing. The output is large, and the particle size of the discharge is below 3㎜, and more than 80% is under 2㎜.
5.Hydraulic and electric starter casing of double stage grinder
It only needs one person to easily open and close, which is not only light and fast, but also safe, reliable and easy to maintain.
6.Unique shift gap adjustment technology of two-stage crusher
The hammer head does not need to be repaired after it is worn. It will be moved and used repeatedly. One hammer head can be used with three hammer heads.
Technical parameters of two-stage crusher:
| model || SCF600x400 || SCF600x600 || SCF800x600 || SCF1000x800 |
| Maximum feed size || ≤200 mm || ≤300 mm || ≤400 mm || ≤500 mm |
| Output granularity || ≤3mm (about 80% above 2mm || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) || ≤3 mm (about 80% above 2 mm) |
| Production capacity || 10-20 tons / hour || 20-30 tons / hour || 35-50 tons / hour || 50-70 tons / hour |
| Allowable material moisture content || ＜ 25% || ＜ 25% || ＜ 25% || ＜ 25% |
| Motor Power || 18.5 + 18.5 (15) -4 levels || 22 + 22 kW-4 || 45 + 45 （37） kw-4 || 75 + 55 kW-4 |
| Dimensions || 2560x1020x1650 (mm) || 2760x1280x1750 (mm) || 3760x1314x2140 (mm) || 4500x1700x3150 (mm) |
| If you need help, please call: 0371-64311509, Gongyi Xiaoyi North China Heavy Machinery Factory is always ready to provide you with better products and the most economical and reasonable solution. Our technical experts are ready to provide you with technical assistance and hope to contact you Establish a long-term, high-value partnership! |
Related Products: Coal Gangue Pulverizer , Shale Pulverizer , Slag Pulverizer , Slag Pulverizer , Pulverized Coal Machine , Cinder Pulverizer , Mobile Pulverizer Keyword: Two-stage Pulverizer